Toolsfluent
Published September 1, 2026·4 min read·Finance

300 Unit Electricity Bill in Pakistan 2026: 50 to 800 Units Priced

300 units costs about Rs 13,072, and 301 units costs Rs 14,326, because un-protected consumers get no slab benefit and one extra unit reprices the whole month. The full table from 50 to 800 units, protected against un-protected, filer against non-filer, computed on the notified February 2026 schedule.

Farhan Murtaza · Founder & Full-Stack Developer

Farhan Murtaza is the founder of Toolsfluent and a full-stack web developer with four years of professional experience building production websites in Next.js, TypeScript, PHP, and WordPress. He has worked on enterprise WooCommerce sites, custom WordPress plugins, and modern React applications. He builds Toolsfluent as a curated, privacy-first hub of utilities for developers, students, freelancers, and small business owners worldwide.

300 Unit Electricity Bill in Pakistan 2026: 50 to 800 Units Priced

A 300 unit electricity bill in Pakistan comes to about Rs 13,072 this billing cycle for an ordinary un-protected domestic connection. Use one unit more, 301, and the same bill becomes Rs 14,326. That is not a typo, and this page explains it, along with the bill for every consumption level from 50 to 800 units.

Every figure is computed with the same engine that runs our electricity bill calculator, on the notified national domestic tariff schedule of February 2026, which applies identically at LESCO, IESCO, MEPCO, GEPCO, FESCO, PESCO, HESCO, QESCO and K-Electric, because domestic rates are set by a single uniform national schedule.

The bill at every consumption level

Units usedUn-protected consumerProtected consumer
50 unitsRs 1,569Rs 751
100 unitsRs 3,104Rs 1,466
150 unitsRs 5,801Rs 2,330
200 unitsRs 7,722Rs 3,193
250 unitsRs 10,899n/a*
300 unitsRs 13,072n/a*
301 unitsRs 14,326n/a*
350 unitsRs 16,653n/a*
400 unitsRs 19,027n/a*
500 unitsRs 25,266n/a*
600 unitsRs 31,225n/a*
700 unitsRs 37,790n/a*
800 unitsRs 48,309n/a*

*Protected status only exists up to 200 units. Cross 200 in any month and the account is billed as un-protected, which is why the protected column ends there.

What the numbers include: energy charge at the slab rate, the Rs 3.23 per unit FC surcharge, 1.5 percent electricity duty, 18 percent GST and the Rs 35 PTV licence fee. They assume a filer, and a month where FPA and QTA are zero.

What they exclude, and why your bill will differ a little: the monthly FPA or QTA line, which changes every month and can move the total in either direction by several hundred rupees, and the fixed capacity charge, which is billed per kW of your sanctioned load, Rs 275 to Rs 675 per kW depending on your slab, so a typical 2 kW house adds roughly Rs 550 to Rs 1,350 on top.

Why 301 units costs Rs 1,254 more than 300

This is the single most expensive misunderstanding in Pakistani electricity billing. For un-protected consumers there is no slab benefit: the slab your total lands in prices every unit of the month, not just the ones above the boundary.

At 300 units you are in the 33.10 per unit slab, so all 300 units bill at Rs 33.10. At 301 units the whole month repricies to the 36.46 slab, all 301 units, and the total jumps from Rs 13,072 to Rs 14,326. One unit, Rs 1,254.

The same cliff exists at every boundary: 200, 300, 400, 500, 600 and 700 units. If your meter is heading toward a boundary in the last days of a billing cycle, the cheapest electricity you will ever save is the few units that keep you under it.

The notification is explicit that only protected consumers get the benefit of the previous slab, and lifeline consumers get none. This is not a DISCO policy; it is the national tariff design.

500 units: where filer status starts to bite

From roughly 500 units up, a second cost appears for non-filers. Domestic bills above Rs 25,000 a month attract 7.5 percent withholding income tax for non-filers under Section 235, and zero for filers. At 500 units that is Rs 25,266 for a filer against about Rs 27,161 for a non-filer, nearly Rs 1,900 a month for not being on the ATL. Filers can claim nothing back because nothing was deducted.

The protected column: why those bills are so much lower

A protected consumer, someone who has stayed at or under 200 units for six consecutive months, pays 10.54 per unit on the first hundred and 13.01 on the second hundred, keeps the slab benefit, and pays the reduced Rs 1.43 FC surcharge. That is why 200 units costs a protected household Rs 3,193 against Rs 7,722 un-protected, a 2.4x difference for identical consumption.

One heavy month breaks the streak and the account reprices as un-protected. If you are near the 200 line in summer, that AC hour is more expensive than it looks.

Cutting the bill rather than predicting it

At 300+ units a month, the arithmetic that matters is usually solar: a household at 500 units pays about Rs 3 lakh a year at these rates, which is most of the cost of a 5 kW system. Run your own numbers in the solar payback calculator and the solar system size calculator.

For the bill itself: check your exact figure with FPA and your own sanctioned load in the electricity bill calculator, and if your bill seems high for the units, the AC running cost guide is usually where the units went.

Where these figures come from

Rates are the notified uniform national domestic schedule, S.R.O. 279(I)/2026, February 2026, as published in the DISCO tariff guides, applied by the same computation engine as our calculators. FPA and QTA change monthly by NEPRA determination, which is why they are shown as excluded rather than guessed.

Frequently Asked Questions

Sources & references

Share: