Toolsfluent

LESCO Bill Calculator 2026-27 (Slab Warning + TOU + Filer)

LESCO bill calculator with 2026-27 NEPRA slab math, protected vs non-protected toggle, TOU peak-hour mode, FPA and QTR inputs, and a slab-crossing warning.

Last reviewed: 7 July 2026Results are estimates. Verify rates from the linked official sources before acting on the number.

About the LESCO Bill Calculator 2026-27 (Slab Warning + TOU + Filer)

Free LESCO bill calculator for Lahore Electric Supply Company residential consumers, updated to the NEPRA S.R.O. 46(I)/2026 tariff notification effective January 2026. Handles the three consumer categories: protected (six-month average under 200 units, uniform lower slab rates, no fixed monthly charge), non-protected (six-month average over 200 units, progressive rate slabs starting at Rs 16.48 per unit and climbing to Rs 42.72 per unit above 700 units, plus fixed monthly charges from Rs 75 to Rs 550), and TOU (Time of Use, voluntary opt-in with dual meter, cheaper off-peak rate Rs 22.29 versus peak Rs 39.63 during 5 PM to 11 PM). The killer feature is a live slab-crossing warning that fires when your current month usage is within 10 units of the next slab boundary, so you can decide whether to unplug the geyser or spare AC for the last few days of the cycle to avoid the Rs 4-6 per-unit rate jump plus the Rs 175-350 fixed-charge tier bump that hits when you cross over. The full breakdown includes: slab-by-slab base energy charge, monthly fixed charge, FPA (Fuel Price Adjustment, user-adjustable to match your last bill, typical range Rs -3 to +8 per unit), QTR (Quarterly Tariff Adjustment, user-adjustable), FC surcharge Rs 0.43 per unit, NJ surcharge Rs 0.10 per unit, Electricity Duty 1.5 percent of base energy charge, GST 18 percent on pre-tax total, TV fee Rs 35 fixed, and Section 235 non-filer WHT 7.5 percent on bills over Rs 25,000. Built for Punjab households in Lahore, Kasur, Sheikhupura, Nankana Sahib and Okara serviced by LESCO. All calculations run client-side in your browser and nothing is sent or stored.

LESCO Bill Calculator 2026-27

Standard rate for households whose 6-month average exceeds 200 units. Progressive slabs with fixed monthly charges.

Read the current month's units from your LESCO bill (usually labelled "Units Consumed" or "kWh").

Section 235 WHT applies to non-filers on bills over Rs 25,000

Fuel Price Adjustment. NEPRA notifies monthly. Check your last bill.

Quarterly Tariff Adjustment. Set once per quarter by NEPRA.

Estimated total bill
Rs 12,003
Effective per-unit
Rs 34.30
Base energy charge (slab math)Rs 7,741
Fixed monthly chargeRs 350
FPA (3.50 per unit)Rs 1,225
QTR (1.50 per unit)Rs 525
FC surcharge (0.43 per unit)Rs 151
NJ surcharge (0.10 per unit)Rs 35
Electricity Duty (1.5%)Rs 116
GST (18%)Rs 1,826
TV feeRs 35
Slab-by-slab breakdown
SlabUnitsRateCharge
1 to 100 units100Rs 16.48Rs 1,648
101 to 200 units100Rs 21.32Rs 2,132
201 to 300 units100Rs 25.09Rs 2,509
301 to 400 units50Rs 29.04Rs 1,452
Base energy subtotalRs 7,741
Save on your LESCO bill

Stay under 200 units. Six-month average below 200 unlocks protected status and Rs 8.74 per unit savings on the 51 to 100 slab plus no fixed charge.

Shift heavy loads off-peak. Rs 17.34 per unit gap between peak and off-peak TOU rates. Run washing machine and geyser after 11 PM.

File your FBR return. Non-filers pay 7.5% extra as Section 235 WHT on bills over Rs 25,000. On a Rs 30,000 bill that is Rs 2,250 saved per month by filing.

Rate source and accuracy

Base tariff slabs verified against NEPRA S.R.O. 46(I)/2026 residential notification effective January 2026, with the February revision under S.R.O. 279(I)/2026 and the quarterly adjustment under S.R.O. 459(I)/2026. NEPRA notifies FPA every month and QTR every quarter, and rates can differ slightly across aggregator sites depending on which cycle they cite.

Get pinpoint accuracy: read the exact FPA and QTR values from your current LESCO bill and enter them above. That gives a number within Rs 100 of the actual bill in almost all cases. If your bill shows a different base per-unit rate than the calculator uses, the NEPRA cycle has shifted; verify at the NEPRA LESCO tariff page. This is an estimate tool. Actual bills may vary due to arrears, adjustments, meter reading errors and cycle-specific NEPRA notifications.

Share:

How to use the LESCO Bill Calculator 2026-27 (Slab Warning + TOU + Filer)

  1. Pick your consumer type: Protected if your six-month average consumption is 200 units or less, Non-protected if higher, or TOU if you have opted into the Time of Use dual-meter tariff.
  2. Enter the units consumed this month, read directly from the LESCO bill (usually labelled Units Consumed or kWh). For TOU, enter peak and off-peak units separately.
  3. Set filer status. Non-filers pay a 7.5 percent Section 235 withholding tax on bills over Rs 25,000; filers do not. Filing your FBR return saves this amount every month.
  4. Adjust FPA and QTR to match the exact per-unit values on your current bill. Defaults are conservative mid-cycle values but NEPRA updates FPA monthly and QTR quarterly.
  5. Read the result. The primary card shows the total payable and effective per-unit rate. Slab-by-slab breakdown table shows exactly which rate applied to which portion of your consumption. Watch for the red slab-crossing warning if your usage is close to the next slab boundary.
  6. Verify against your LESCO bill. Actual bills may vary due to arrears, adjustments, meter reading errors and cycle-specific NEPRA notifications. Confirm the exact number on your official bill or the NEPRA LESCO tariff page before disputing any charges.

Frequently Asked Questions

Sources

Rates, slabs and formulas used in this calculator are cross-checked against the following official sources. Always verify the latest number on the original page before making a financial decision.

Discover more free tools

Toolsfluent has dozens of fast, privacy-friendly tools that work right in your browser. Explore by category to find what you need.

Browse all tools →